[20240219] – Lab – After storing the last parts, the desk is reasonably clean and ready for a new project.[20240219] – Lab – After storing the last parts, the desk is reasonably clean and ready for a new project.[20240219] – Lab – After storing the last parts, the desk is reasonably clean and ready for a new project.
[20240215-20240218] – Cleanup and Reorganization
These days I cleaned up and reorganized the Lab. In particular, I migrated from using storage cabinets with a large number of small drawers to using the Kuggis boxes from IKEA for parts storage. I disposed the cabinets, quite some obsolete stuff as well as a lot of packaging material.
[20240218-18:00:12] – Lab – The W side. Not that many changes here. There are some remaining parts on the bench that still need to be stored somehow.[20240218-18:00:31] – Lab – The corridor in the SE corner. Well, it’s somewhat accessible again… Note that these is ample storage in the back of the corridor; I’m thinking of using this space for boxes for projects in the pipeline (trying to keep their number to four or so…), or in maintenance.[20240218-18:00:38] – Lab – The E side has changed quite a lot with the introduction of the Kuggis boxes. [20240218-18:00:48] – Lab – The Kuggis boxes that haven’t found their final destiny yet.
[20211117] – Chest of Drawers
Today I finished (well, somewhat) my first two Chests of Drawers in the Lab, and I populated them. The photo set also contains some random pictures of reconnecting the instruments.
Still to be done is a chest of drawers (number 03) for the (main) HP-70000.
[20211117 18:23] The pa3gyf-chest-of-drawers-02. Visible are an HP-8350B (top; top drawer), Wiltron-560A (bottom; top drawer), and my HP-8566B (bottom drawer).[20211117 18:23] The pa3gyf-chest-of-drawers-01. Visible are my secondary HP-70000 (top), HP-3586A (middle), and HP-8663A (bottom).
[20211116] – Chest of Drawers
Today I worked on the Chest of Drawers in the Lab, using the recently delivered Junker slides and mounting brackets.
[20211116 14:13] – HAM – Lab – Chest of Drawers. Situation overview. Visible are my HP-3586A (top left), HP-8663A (bottom left) and HP-8566B (bottom right).[20211116 18:49] – HAM – Lab – Chest of Drawers. The mounting brackets are screwed against the drawer extensions (two brackets per drawer extension). Also note that the drawers trey are resting upon has been reinstalled (it uses the “old” Junker 100kg/800mm sliders). The instrument at the bottom of the picture is my HP-8566B.[20211116 21:12] – HAM – Lab – Chest of Drawers. The first drawer using the new drawer extensions has been installed. The plywood plate has not yet been fixed to the mounting brackets at this time. The instrument at the bottom of the picture is my HP-8663A.
[20211110] – Junker Slides Delivery
Today, a new set of Junker slides was delivered. The photo set also contains pictures of the mounting brackets that were delivered (and ordered) many weeks earlier.
